Kerley and Sears, Inc. Truck and Stationary Blowers

HOME   DIESEL AND ELECTRIC UNITS   TRAILER MAINT   BLOWER MAINT   TRUCK BLOWERS   PRODUCTS   CONTACT

Blowers Preventive Maintenance

    A Good Maintenance Program Will Keep Your Blower in Top Running Condition.

    A newly installed blower should be checked frequently during the first month of operation, especially lubrication. Check oil level in both drive end and gear end of the blower and add oil as needed. Complete oil changes are recommended every 500 operating hours, or more frequently depending on type of oil and oil operating temperature.

    The following is recommended as a minimum maintenance program:

    DAILY

    1. Check and maintain oil level, add oil as needed.

    2. Check air filter.

    WEEKLY

    1. Clean air filter. A clogged filter can seriously affect efficiency, cause overheating, and oil usage.

    2. Check relief valve to be sure it is operating properly.

    MONTHLY

    1. Inspect entire system for leaks.

    2. Inspect condition of oil and change if necessary.

    SEMI-ANNUALLY

    1. Inspect the drive line bearings.

    2. Change oil even if 500 operating hours has not been reached.

Kerley and Sears, Inc. Truck and Stationary Blowers. Tuthill Vacuum & Blower Systems.
Electric and Diesel Units, Trailer Maintenance, Blower Maintenance, Truck Blowers.
4331 Cement Valley Rd, Midlothian TX 76065 800-346-4381
110 FM 1966, Maxwell TX 78656 512-357-6611

Copyright 2014 © Kerley and Sears Inc. All Rights Reserved